SWITCH 24P LAN 10/100M TENDA TEF1126P-24-250W POE 1P 10/100/1000BASE TX 1P 1000BASE-X SFP

Standard&Protocol

IEEE 802.3、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at



MTBF

≥100,000hours



Indicator

24*Link/Act per device

1*G1 Link/Act per device

1*SFP Link/Act per device

1*PoE-MAX per device

1*Power per device



Interface

24 10/100Base-TX ports(Data/Power)

1 10/100/1000Base-T port(Data)

1 1000Base-X SFP port



Lightning Protection

6KV



Store & Forward

Yes



exchange capacity

8.8 Gbit/s



Packet Forwarding Rate

6.55Mpps



MAC Address Table

4K



PoE supply management

Port 1 to Port 16 support IEEE802.3at/af POE standard



PN pass-through

1 2 4 5 +，3 6 7 8 -



Input Power

AC：100-240V～ 50/60Hz



Dimension

294*215*44mm( W x D x H )



Power Consumption

in full configuration： PoE Max Power Supply：225W



Port Features

CCTV： 1-8 ports support QoS，If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device，like the monitoring computer. This ensures smoother monitoring video playback.

Standard： The switch’s functions are similar with a common unmanaged switch’s and all the ports of the switch can communicate with each other.

VLAN： In this mode, 1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts.

Extend： In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.



Environment

Operating Temperature: 0℃~40℃ (32℉~104℉)

Storage Temperature: -40℃~70℃ (-40℉~158℉)

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~90% non-condensing